Samsung LN40A650A1F - Connecting a Digital Audio System; Connecting an Amplifier;DVD Home Theater

English - 11
Connecting a Digital Audio System
The rear panel jacks on your TV make it easy to connect a Digital Audio System (Home theater/Receiver) to your TV.
1. Connect an Optical Cable
between the “DIGITAL AUDIO
OUT (OPTICAL)” jacks on
the TV and the Digital Audio
Input jacks on the Digital Audio
System.
When a Digital Audio System
is connected to the “DIGITAL
AUDIO OUT (OPTICAL)” jack:
Decrease the volume of the
TV and adjust the volume
level with the system’s volume
control.
TV Rear Panel
Digital Audio System
Optical Cable (Not supplied)
Each Digital Audio System has a different back panel conguration.
When the receiver (home theater) is set to On, you can hear sound output from
the TV’s Optical jack. When the TV is displaying a DTV(air) signal, the TV will
send out 5.1 channel sound to the Home theater receiver. When the source is a
digital component such as a DVD and is connected to the TV via HDMI, only 2
channel sound will be heard from the Home Theater receiver. If you want to hear
5.1 channel audio, connect the DIGITAL AUDIO OUT (OPTICAL) jack on the
DVD player or Cable/Satellite Box directly to an Amplier or Home Theater, not
the TV.
➣
➣
Connecting an Amplier/DVD Home Theater
1. Connect Audio Cables
between the AUDIO OUT
[R-AUDIO-L] jacks on the TV
and AUDIO IN [R-AUDIO-L]
jacks on the Amplier/DVD
Home Theater.
When an audio amplier is
connected to the “AUDIO OUT
[R-AUDIO-L]” jacks: Decrease
the volume of the TV and
adjust the volume level with
the Amplier’s volume control.
Each Amplier/DVD Home Theater has a different back panel conguration.
When connecting an Amplier/DVD Home Theater, match the color of the
connection terminal to the cable.
➣
➣
TV Rear Panel
Amplier/DVD Home Theater
Audio Cable (Not supplied)
BN68-01429D-Eng.indb 11 2008-06-24 �� 11:35:18