Samsung LN40A650A1F - Memorizing the Channels

English - 17
Memorizing the Channels
Your TV can memorize and store all of the available channels for both “off-air” (Air) and “Cable” channels. After the available
channels are memorized, use the CH < or CH > button to scan through the channels. This eliminates the need to change
channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source,
memorizing the channels (automatic) and adding or deleting channels (Channel Lists).
Selecting the Video Signal-source
Before your television can begin memorizing the available channels, you must
specify the type of signal source that is connected to the TV (i.e. an Air or a Cable
system).
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Channel”, then press the ENTER
button.
2.
Press the ENTER button to select “Antenna”.
Press the ▲ or ▼ button to select “Air” or “Cable”, then press the ENTER
button.
Press the EXIT button to exit.
If the antenna is connected to ANT 1 IN
(AIR), select “Air” and if it is connected to
ANT 2 IN (CABLE), select “Cable”.
If both ANT 1 IN (AIR) and ANT 2 IN
(CABLE) are connected, select the
antenna input you want.
If the antenna input is not selected
properly, noise may appear on the
screen.
➣
➣
Easy Setting
1.
Press the TOOLS button on the remote control.
2.
Press the ▲ or ▼ button to select “Switch to Cable” (or “Switch to Air)”.
3. Press the ENTER button to switch Cable (or Air).
or
Channel
Antenna : Air ►
Auto Program
Full Guide
Mini Guide
Default Guide : Mini Guide
Channel List
Fine Tune
Signal strength
Channel
Antenna : Air ►
Auto Program
Full Guide
Mini Guide
Default Guide : Mini Guide
Channel List
Fine Tune
Signal strength
Air
Cable
Tools
Device List
Guide
Picture Mode : Standard
Sound Mode : Custom
Sleep Timer : Off
Lock Current Channel
SRS TS XT : Off
Energy Saving : Off
Switch to Cable
Move Enter e Exit
BN68-01429D-Eng.indb 17 2008-06-24 �� 11:35:23