Samsung LN40A650A1F - Customizing the Picture Settings

English - 21
Customizing the Picture Settings
Your television has several setting options that allow you to control the picture quality.
1.
To select the desired picture mode, follow the “Changing the Picture
Standard” instructions numbers 1 and 2.
2.
Press the ▲ or ▼ button to select “Backlight”, “Contrast”, “Brightness”,
“Sharpness”, “Color” or “Tint(G/R)”, then press the ENTER button.
3. Press the ◄ or ► button to decrease or increase the value of a particular
item. Press the ENTER button.
Press the EXIT button to exit.
When you make changes to “Backlight”, “Contrast”, “Brightness”,
“Sharpness”, “Color” or “Tint(G/R)”, the OSD will be adjusted accordingly.
In PC mode, you can only make changes to “Backlight”, “Contrast” and
“Brightness”.
Settings can be adjusted and stored for each external device you have
connected to an input of the TV.
The energy consumed during use can be signicantly reduced if the level
of brightness of the picture is reduced, and that this will reduce the overall
running cost.
In TV, AV1, AV2, S-Video modes of the PAL system, you cannot use the
“Tint” Function.
Backlight: Adjusts the brightness of LCD back light.
Contrast: Adjusts the contrast level of the picture.
Brightness: Adjusts the brightness level of the picture.
Sharpness: Adjusts the edge denition of the picture.
Color: Adjusts color saturation of the picture.
Tint(G/R): Adjusts the color tint of the picture.
•
•
•
•
•
•
➣
➣
➣
➣
➣
7Backlight
Enter Return
AdjustMove
Mode : Standard
Backlight : 7 ►
Contrast : 95
Brightness : 40
Sharpness : 50
Color : 50
Tint (G/R) : G50/R50
Detailed Settings
Picture Options
Picture
BN68-01429D-Eng.indb 21 2008-06-24 �� 11:35:24