Samsung MIM-E03FN - Page 28

Field setting mode
28
English
Field Setting Mode
External Room Thermostat (Field Option) (FSV#2091/2092)
• Room thermostat #1 (#2091, Default 0 for no usage), #2 (#2092, Default 0 for no usage)
– To use AI Home for heating/cooling operation, both of the above settings should be set to 0
simultaneously. If not, thermostat controls system.
– To use the External Room Thermostat option, set the 2-zone control option (FSV #4061) to "0" for
disabling it.
– If set to #2091/#2092 1, the compressor can be turned on or off only by the thermostat.
– 


– During the thermostat operation, the user has the possibility to shift up or down the target water

1
0
#2092 2,
1
0
#2092 3,
1
0
#2092 4,
Water pump
Water pump
1min
3min 7min 7min3min
ON ON
Time
Time
Time
Time
Time
Time
ON
OFF OFF
OFF
Water pump
Water law
Thermo
Water law
Thermo
Water law
Thermo
DB68-12922A-02_IB_24Y EHS AE7000D_EU_EN_.indd 28DB68-12922A-02_IB_24Y EHS AE7000D_EU_EN_.indd 28 2024-12-11 오전 10:04:412024-12-11 오전 10:04:41