6
Power Smart Features
Operate the product by using the controller.
Operating basic modes
Select Zone 1 or 2 on the control card on the Home screen to access the zone page, and select from Auto, Cool,
Heat modes.
Auto mode
Hydro unit will automatically adjust the temperature of discharge water with the Auto mode for indoor
heating.
NOTE
• When Water Law is active, the target supply water temperature will be determined automatically
depending on the outdoor temperature: For the Heat mode, colder outdoor temperatures will result in
warmer water.
Cool mode
You can adjust cooling temperature as you like with the Cool mode to cool indoor place.
• When selecting the Heat mode during the Cool mode, the Cool mode will be canceled.
Heat mode
Floor heating is available with the Heat mode by providing hot water in the spring, autumn and winter.
• When selecting the Cool mode during the Heat mode, the Heat mode will be canceled.
NOTE
• When setting standard cooling & heating temperature as indoor temperature, the Auto mode cannot be
selected.
Controller Operation
DB68-12922A-02_IB_24Y EHS AE7000D_EU_EN_.indd 6DB68-12922A-02_IB_24Y EHS AE7000D_EU_EN_.indd 6 2024-12-11 오전 10:04:372024-12-11 오전 10:04:37
To Next Page
Loading...
