7
Power Smart Features
Domestic Hot Water (DHW) mode
Select DHW on the control card on the Home screen to access the DHW page. Select from Economic, Standard,
Power, and Forced modes.
NOTE
• To operate hot water mode, you need to set the hot water function 'YES' in the field specification setting
mode (#3011) of AI Home and connect the temperature sensor of hot water tank.
• When the Cool/Heat mode and the DHW mode are selected at the same time, the Cool/Heat mode and the
DHW mode will operate alternately.
•
(power) for the DHW mode cannot be used when the Booster heater is not in use.
(The model "AE200DN****" does not have the booster heater but is alternatively controlled by the backup
heater.)
• If you want to enjoy a leisurely bath or need a lot of warm water urgently, select the Forced mode. When
this mode is enabled, it is assured that the full capacity of the heat pump is only delivered for domestic
water heating.
CAUTION
• By default field setting value option, this function will not be turned off automatically.
• If you want a Forced mode for a certain amount of duration time, change the field setting value of AI Home.
DB68-12922A-02_IB_24Y EHS AE7000D_EU_EN_.indd 7DB68-12922A-02_IB_24Y EHS AE7000D_EU_EN_.indd 7 2024-12-11 오전 10:04:372024-12-11 오전 10:04:37
To Next Page
Loading...
