Controller Operation
8
Power Smart Features
Adjusting desired temperature
On each zone page, touch Temp and scroll up/down to adjust the temperature.
NOTE
• You can adjust the desired temperature by 0.5 or 1 °C. (Default: 1 °C)
Setting the standard temperature
On the Home screen, select > Heat pump > Standard temperature.
Select from Water outlet and Indoor temperature, and press Apply to save the change.
NOTE
• When the Reference temperature to control is Water outlet, you can set the temperature only for Water
outlet.
• When the Reference temperature to control is Indoor temperature, you set the temperatures for Indoor
temperature.
• In case of the model that can support both, you can set only the temperature for Indoor temperature but
the temperature for Water outlet is also affected together.
• Depending on the Reference temperature set for cooling and heating, the controllable temperatures are
restricted for each mode.
Auto Cool and Heat
Water outlet Water Law Water outlet
Indoor temperature - Indoor temperature
DB68-12922A-02_IB_24Y EHS AE7000D_EU_EN_.indd 8DB68-12922A-02_IB_24Y EHS AE7000D_EU_EN_.indd 8 2024-12-11 오전 10:04:382024-12-11 오전 10:04:38
To Next Page
Loading...
