Maintaining the Unit
50
Appendix
<Emergency hot water supply_(when DHW on (FSV#3011) and Booster Heater on (FSV#3031))
• Hot water is supplied only by the booster heater if the outdoor unit malfunctions.
Method 1 (AI Home setting)
• Enabling the function: Select Emergency hot water supply (
> Heat pump > Emergency hot water
supply) Turn on in AI Home
• Enabling the function: Select Emergency hot water supply (
> Heat pump > Emergency hot water
supply) Turn off in AI Home
Method 2 (Dip Switch setting)
• Enabling the function: Turn off Control Kit Dip Software 2, then turn the power off and on.
• Disabling the function: Turn on Control Kit Dip Software 2, then turn the power off and on.
• Default operation: Automatic hot water supply is performed at a set temperature of 50°C.
NOTE
• Emergency heating and Emergency hot water supply do not function concurrently.
• Model AE200DN*MPK comes with a backup heater instead of a booster heater.
DB68-12922A-02_IB_24Y EHS AE7000D_EU_EN_.indd 50DB68-12922A-02_IB_24Y EHS AE7000D_EU_EN_.indd 50 2024-12-11 오전 10:04:462024-12-11 오전 10:04:46
To Next Page
Loading...
