Samsung ML-2250 Series User Manual

P RINTING T ASKS
4.28
Changing the Status Monitor Program
Setting
The following window opens when you click the Status monitor
icon on the Windows task bar and select Option.
• Display when job is finished for network printer shows
the Status monitor balloon when your job is complete.
• Display when error occurs during printing the Status
monitor balloon appears when an error occurs while printing.
• Schedule an automatic status checking every allows the
computer to update the printer status regularly. Setting the
value close to 1 second causes the computer to check the
printer status more frequently, thereby allowing a faster
response to any printer error.
NOTE: When the Status monitor balloon appears to indicate an
error, you can cancel the current print job or see the corresponding
solution. If you select Cancel Printing, turn the printer off and
then click OK. It may take several minutes. Note that this will lose
data which is being sent to the printer via network.

Samsung ML-2250 Series Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
First Print Out Time	Less than 10 seconds
Memory (Standard)	8 MB
Memory (Maximum)	72 MB
Duplex Printing	Manual
Paper Capacity (Standard)	250 sheets
Interface	USB 2.0, Parallel
Paper Capacity (Maximum)	500 sheets
Output Capacity	150 sheets
Media Sizes	A4, A5, Letter, Legal, Executive
Operating Systems Supported	Windows, Mac OS, Linux
Power Consumption	350W (Printing)
Print Speed	Up to 22 ppm (A4)