Samsung ML-2250 Series - Printing on Card Stock or Custom-Sized Materials

U SING P RINT M ATERIALS
3.21
3
Printing on Card Stock or
Custom-sized Materials
Postcards, 3.5 by 5.83 in. (index) cards and other custom-sized
materials can be printed with your printer. The minimum size is
76 by 127 mm (3 by 5 in.) and the maximum size is 216 by
356 mm (8.5 by 14 in.).
1 Open the Multi-Purpose Tray and the rear output tray.
2 Load print material with print side up and short edge first.
Guidelines
• Always insert the short-edge into the Multi-Purpose Tray first.
If you want to print in landscape mode, make this selection
through your software. Inserting paper long-edge first may
cause a paper jam.
• Do not load more than 5 cards into the Multi-Purpose Tray at
a time.
• Do not print on media smaller than 76 mm (3 in.) wide or 127
mm(5 in.) long.
• Set margins at least 6.4 mm (0.25 in.) away from the edges
of the material in the software application