P
RINTING
T
ASKS
4.10
From the software application
1
When you change the print settings from your software
application, access the printer properties. See page 4.2.
2
Click the Graphics tab, and select the Toner Save option.
You can select from:
• Printer Setting: If you select this option, the Toner Save
feature is determined by the setting you’ve made on the
control panel of the printer.
• On: Select this option to allow the printer to use less
toner on each page.
• Off: If you don’t need to save toner to print a document,
select this option.
3
Click OK.
NOTE:
The setting in the software application overrides that on
the control panel.
To Next Page
Loading...
