Alignment & Adjustments
Service Manual
4-5
Samsung Electronics
* The procedure and content above can be changed according to the situation.
4.1.5 Motor Test
These functions are to check a current state (normal or not) of all motors.
• Usage
1. Press the
Arrow Keys ( ) until finding Component Test / 3.Motor Test message on the panel.
2. Press the
OK Key , when it is found.
3. Press the
Arrow keys until finding a suitable function (Refer to the table below).
4. Press the
OK Key , when it is found.
5. Press the
OK Key for execution or the Back key for return.
• Function
Function Name Description Display(LCD)
Main Mtr Fwd. The motor will run on the forward direction or stop. Main Mtr Fwd. [ON] / [OFF]
Main Mtr Bwd. The motor will run on the backward direction or stop. Main Mtr Bwd. [ON] / [OFF]
Main Mtr Slow. The motor will run on the forwarding direction by half speed. Main Mtr Slow. [ON] / [OFF]
Dev Mtr Nor. The motor will run on the forwarding direction by normal speed. Dev Mtr Slow. [ON] / [OFF]
Dev Mtr Slow. The motor will run on the forwarding direction by half speed. Dev Mtr Slow. [ON] / [OFF]
Duplex Mtr Fwd. The motor will run on the forwarding direction. Duplex Mtr Fwd. [ON] / [OFF]
T2 Feed Motor The motor will run on the forward direction or stop. T2 Feed Motor [ON] / [OFF]
T3 Feed Motor The motor will run on the forward direction or stop. T3 Feed Motor [ON] / [OFF]
T4 Feed Motor The tray2 motor will run on the forward direction or stop. T Feed Motor [ON] / [OFF]
4.1.6 Fan Test
These functions are to check a current state (normal or not) of all fans.
• Usage
1. Press the
Arrow Keys ( ) until finding Component Test / 4.Fan Test message on the panel.
2. Press the
OK Key , when it is found.
3. Press the
Arrow keys until finding a suitable function (Refer to the table below).
4. Press the
OK Key , when it is found.
5. Press the
OK Key for execution or the Back key for return.
To Next Page
Loading...
