Samsung ML-4551NR - Exit Roller

Disassembly and Reassembly
Service Manual
5-21
Samsung Electronics
5.20 Exit Roller
1. Before you remove the Exit Roller, you should
remove:
- Top Cover (Refer to the 5.15)
2. Take out the Actuator.
3. Remove the Exit Roller and Bearing, as shown below.
4. Release the Exit Gear, as shown below.
5. Remove the Duplex Exit Roller as same method.
6. Release the Duplex Exit Gear, as shown below.
Exit Gear
Bearing
2
1
Duplex
Exit Roller
Actuator
Bearing
Rack-Exit Roller
Exit Roller
Bearing
Duplex Exit Gear
Bearing
2
1