Service Manual
Disassembly and Reassembly
5-20
Samsung Electronics
5.19 Duplex Solenoid Ass'y
1. Before you remove the Exit Solenoid Ass'y, you
should remove:
- Top Cover (Refer to the 5.15)
2. Unplug the Duplex Solenoid Harness from the Main
PBA.
3. Remove three screws and take out the Exit Solenoid
Ass'y.
4. Remove spring pin and remove two screws and take
out the Exit Solenoid.
To Next Page
Loading...
