Samsung ML-4551NR - Print Test and Option Version

Alignment & Adjustments
Service Manual
4-9
Samsung Electronics
* The procedure and content above can be changed according to the situation.
Function Name Description Display(LCD) Remarks
Erase Lamp The lamp will be lighted or not. Erase Lamp [ON] / [OFF]
THV Read The Adc will be displayed on the panel. THV Read [xxx] [ xxx] is it’s ADC
MHV Read The Adc will be displayed on the panel. MHV Read [xxx] xxx] is it’s ADC
4.1.11 Print Test and Option version
These functions are to check a total print process state and the option s version.
• Usage
1. Press the
Arrow Keys ( ) until finding Component Test / 10.Print Test message on the panel.
2. Press the
OK Key , when it is found.
3. Press the
arrow keys until finding a suitable function. (Refer to the table below)
4. Press the
OK Key , when it is found.
5. Press the
OK Key for execution or the Cancel key for stop.
• Function
* The procedure and content above can be changed according to the situation.
Function Name Description Display(LCD) Remarks
Pattern Print The printer can print the previously saved mode Pattern Print [ON]
(Simplex or Duplex / Copy/ pattern kind)
T2 Version This is the version for Tray2 T2 Version [x.xx] x.xx is version.
T3 Version This is the version for Tray3 T3 Version [x.xx] x.xx is version.
T4 Version This is the version for Tray4 T4 Version [x.xx] x.xx is version.
Duplex Version This is the version for Duplex Duplex Version [x.xx] x.xx is version.