Alignment & Adjustments
Service Manual
4-15
Samsung Electronics
4.2.1.4 In the duplex unit area
• Duplex jam 0
1. Pull the duplex unit out of the printer. 2. Locate the jammed paper and remove it.
3. Insert the duplex unit into the slot.
4. Open and close the top cover. The printer will resume
printing.
4.2.1.3 In the paper exit area
1. Open and close the top cover. The jammed paper is
automatically ejected from the printer.
2. Gently pull the paper out of the output tray.
If you do not see the jammed paper or if there is any
resistance when you pull, stop and go to the next
step.
3. Open the rear cover.
4. By pusing the fuser levers upwards, loosen the
jammed paper. Then gently pull the paper straight out.
To Next Page
Loading...
