You can listen to a stored radio station as following:
Switch the system on by pressing the
1
POWER ( ) button.
Select TUNER by pressing the
2
TUNER button on the main unit.
You can select TUNER by pressing the FUNCTION button on the
remote control.
Select FM or AM by pressing
3
TUNER button again in the TUNER mode
on the main unit.
Press the
4
TUNING MODE button on the remote control until “PRESET”
is displayed.
Press
5
[ or ] to select the stored station on the main unit.
or
Turn the EASY SEARCHING JOG control left or right on the main unit
to select the stored station.
or
Select the stored station by pressing the TUNING/ALBUM
or
button on the remote control.
Result: The stored station is now received.
Searching for and Storing the Radio
Stations
You can store up to: 15 FM stations, 15 AM stations.
Switch the system on by pressing the
1
POWER ( ) button.
Select TUNER by pressing the
2
TUNER button on the main unit.
You can select TUNER by pressing the FUNCTION button on the remote
control.
Select FM or AM by pressing the
3
TUNER button again in the TUNER
mode on the main unit.
To search for a station Press
4
TUNING MODE button
Preset ............................ Once or more times until PRESET is displayed.
You can search the stored frequencies in the
Preset mode.
Manually .......................
Once or more times until MANUAL is displayed.
You can
search the frequencies one by one in the
Manual mode.
Select the station to be stored by:
5
Press the
◆
TUNING/ALBUM or button on the remote control.
or
Turn the
EASY SEARCHING JOG control
left or right to search the
station.
To scroll through the frequencies faster when searching
◆
manually, press and hold the TUNING/ALBUM
or on the
remote control.
◆
The automatic search procedure may stop on a frequency that does not
correspond to a radio station. If this happens, use the Manual mode.
Adjust the volume by:
6
Turning the
◆
VOLUME knob on the front panel
or
Pressing the
◆
VOL + or – buttons on the remote control
Select the FM stereo or mono mode by pressing
7
MO/ST.
In the AM Radio, the MO/ST button does not work.
◆
If you do not want to store the radio station found, revert to Step
8
4 and
search for another station.
Otherwise:
a Press the ENTER (
) button.
b Press the ENTER (
) button to store the radio station.
To store any other radio frequencies required, repeat Steps
9
3 to 7.
In Tuner mode
➣
In the Manual mode, you can use
◆
or
button on the main unit to manual search a radio station.
◆
During the Auto Searching mode, press STOP(@)
button on the main unit to
stop auto searching.
In the Preset mode, you can use
◆
or button or the EASY
SEARCHING JOG control on the main unit to search a stored radio station.
Selecting a Stored Station