Insert or replace remote control batteries when you:
Purchase the mini-compact system
◆
Find that the remote control is no longer operating correctly
◆
When replacing the batteries, use a new set of batteries and never mix
☛
alkaline and manganese batteries.
Place your thumb on the position marked
1
+ on the battery compartment cover
(rear of the remote control) and pull the cover in the direction of the arrow.
Insert two AAA, LR03 or equivalent batteries, taking care to respect the
2
polarities:
+ on the battery on
◆
in the battery compartment
– on the battery on
◆
in the battery compartment
Replace the cover by sliding it back until it clicks into position.
3
If you will not be using the remote control for a long time, remove
◆
the batteries to prevent corrosion.
The remote control can be used up to approximately 7 meters in a
◆
straight line. It can also be operated at a horizontal angle of up to
30° from the remote control sensor.
Before plugging your system into a main socket, you must check the
☛
voltage.
Check the position of the voltage selector on the rear of the system
1
(OPTIONAL).
Plug the main lead (marked AC Cord on the rear of the system) into an
2
appropriate socket.
3
Press the POWER ( ) button to turn your mini-compact system on.
The Speakers connector terminals are located on the rear of the system.
Left speaker (marked L)
◆
Right speaker (marked R)
◆
1
To achieve the correct sound quality, connect those speaker connector cables to
the speaker connector terminals of the system.
Inserting Remote Control Batteries
Connecting the Speakers
Connecting your System to the Power Supply
Connect the LED cables of the Front Speakers to each LED Terminals
2
of the system.
You can enjoy the special light effect on your speakers.
◆
To Next Page
Loading...
