11 English
Moving the Speaker Set
You can move the speakers to and install them in a desired location.
Moving a Speaker
1. Unlock the wheels by pulling up the lock
latch in the direction of the arrow.
•
To lock the wheels, pull down the latch.
2. Hold the speaker by the handles located on
either side of the speaker's top, and then roll
the speaker to its new location.
|
CAUTION
|
✎
Before using the speakers, make sure you have installed them on an
even surface and have locked their wheels.
✎
Whenever you move a speaker for installation, repair, or cleaning,
move it in a straight line (back and forth). Moving it in a zigzag
fashion may damage the floor.
✎
Be careful not to tip a speaker over when moving it on an uneven
surface.
✎
Do not place a speaker on a slant or on a slanted surface. otherwise
it can move even if its wheels are locked.
< Locked > < Unlocked >
[MX-JS9500-ZA]AH68-02851A-00ENG.indd 11 2015-04-14 오후 1:37:39
To Next Page
Loading...
