Samsung MX-JS9500 - Listening to the Radio; To Store the Stations You Want

03 Functions
Auto Change Function
You can play a disc followed by a USB device
connected to USB1 and/or USB2 continuously.
1. Press the AUTO CHANGE button to select
a mode, and then press
¬
to apply your
selection.
•
If My List Play has not been set in CD/USB
mode, the settings change as follows:
AUTO CHANGE OFF
;
AUTO CHANGE ALL
•
If My List Play has been set in CD/USB
mode, the settings change differently:
AUTO CHANGE OFF
;
AUTO CHANGE ALL
;
AUTO CHANGE MY LIST
•
When the AUTO CHANGE mode is
"ALL",
-
The Hi-Fi Component will play
music from DISC, USB1, and USB2
continuously.
-
When the AUTO CHANGE mode is
"MY LIST", the Hi-Fi Component will
play My List tracks from DISC, USB1,
and USB2 continuously.
-
If you press the POWER button, the
function change button, or the OPEN/
CLOSE button, the AUTO CHANGE
function automatically switches to
"OFF" mode.
-
The REPEAT function is disabled and
automatically changes to OFF.
•
When a USB device is playing, if you
disconnected the USB device, the
AUTO CHANGE function automatically
switches to "OFF" mode.
•
If there's no USB device in USB1, the Hi-Fi
Component will jump to USB2.
•
When the auto change mode is "ALL/
MY LIST", the DELETE , MY LIST and
REPEAT functions do not work, and the
unit displays "AUTO CHANGE ALL/MY
LIST".
•
When DISC play ends, if there's no USB
1, the unit will play music from USB 2.
•
When DISC play ends, if there's no USB
1 and USB 2, the unit will continue to
play the disc.
•
When USB 2 play ends, if there's no
DISC, the unit will play music from USB 1.
Listening to the Radio
To Store the Stations You Want
You can store up to: 15 FM stations.
1. Select FM by pressing the TUNER button.
2. To search for a station, press the TUNING
MODE button on the remote control or
the
@
button on the main unit one or
more times until MANUAL is displayed.
3. Press the MO/ST button to switch
between stereo and mono.
•
In a poor reception area, select MONO
for a clear, interference-free broadcast.
•
This applies only when listening to an
FM station.
4. Find a station by:
•
Pressing for a moment and then
releasing the TUNING
1
/
2
or
,
/
.
buttons on the remote control to
automatically search for broadcasting
stations. The unit will search through
the FM band and stop at the next
broadcasting station.
5. If you do not want to store the radio
station found, go back to Step 4 and
search for another station.
Otherwise:
a. Press the
¬
button.
b. If you don't want to assign a Preset
number to the station, press the
¬
button again to store the station. If you
want to assign a Preset number, go to
Step c.
21 English
[MX-JS9500-ZA]AH68-02851A-00ENG.indd 21 2015-04-14 오후 1:37:42