Samsung MX-JS9500 - Timer Function; Setting the Clock; Setting the Timer

Functions
c. If you want to assign a Preset number
to the station, press the TUNING
1
/
2
or
,
/
.
buttons on the remote
control to scroll through and select
a Preset number. You can select a
number from 1 to 15. When done,
press the
¬
button.
6. To store other radio stations, repeat Steps
4 to 5.
|
NOTE
|
✎
In Tuner mode
-
In the MANUAL mode, you can use the
1
or
2
button.
-
In the PRESET mode, you can use the
1
or
2
button on the main unit to search
for a stored radio station.
Selecting a Stored Station
To listen to a stored station, follow these steps:
1. Select FM by pressing the TUNER button
on the main unit or remote control.
2. Press the TUNING MODE button on
the remote control or the
5
button on
the main unit one or more times until
"PRESET" is displayed.
3. Press the
1
,
2
buttons on the main unit
or the TUNING
1
/
2
or
,
/
.
buttons
on the remote control to select a preset
number.
or
Use the TUNING
1
/
2
or
,
/
.
buttons
to select a stored station.
Timer Function
Setting the Clock
For each step, you have a few seconds to set
the required options. If you exceed this time,
you must start again.
1. Press the TIMER SET button on the remote
control twice. "CLOCK SET" is displayed.
2. Press the
¬
button on the remote
control. The hour flashes.
•
To increase the hours:
,
•
To decrease the hours:
.
3. When the correct hour is displayed, press
the
¬
button, and then the minutes flash.
•
To increase the minutes:
,
•
To decrease the minutes:
.
4. When the correct minute is displayed,
press the
¬
button. "TIMER PLAY SET"
appears in the display.
Setting the Timer
The timer enables you to set the product to
switch on or off at specific times automatically.
•
Before setting the timer, check that the
current time is correct.
•
For each step, you have a few seconds to set
the required options. If you exceed this time,
you must start again.
•
If you no longer want the product to be
switched on or off automatically, you must
cancel the timer by pressing the TIMER
ON/OFF button.
Example: You want to wake up to
music every morning.
1. Press the TIMER SET button until TIMER
PLAY SET is displayed.
2. Press the
¬
button.
Result: ON TIME is displayed for a few
seconds. You can set the timer switch-on
time.
3. Set the timer switch-on time.
a. Press the
,
/
.
button on the remote
control to set the hours.
b. Press the
¬
button.
Result: The minutes flash.
c. Press the
,
/
.
button on the remote
control to set the minutes.
d. Press the
¬
button.
Result: OFF TIME is displayed for a few
seconds. You can now set the timer
switch-off time.
22 English
[MX-JS9500-ZA]AH68-02851A-00ENG.indd 22 2015-04-14 오후 1:37:42