Samsung MX-JS9500 - Special Sound Effects

Functions
✎
The maximum TUNER/AUX recording time
is 5 hours.
✎
If USB2 has no USB device connected, and
you press the USB REC button, "USB2 NOT
READY" is displayed.
Recording Speed
You can select the recording speed before
recording.
During the CDDA disc mode, each time you
press the REC SPEED button on the remote
control, the recording speed will change as
follows:
NORMAL SPEED RECORD
;
HIGH SPEED
RECORD
•
When you record from the tuner or an
external source, you cannot change the
recording speed.
•
If you select HIGH SPEED RECORD, sound is
not produced during the recording.
•
If you connect the microphone, you have
one recording speed mode available:
NORMAL SPEED RECORD.
•
During recording, if you disconnect the
microphone, the recording will stop. If you
reconnect the microphone, the recording
will not restart.
|
NOTE
|
✎
Even if you select HIGH SPEED RECORD, the
unit may not record in 4x speed depending
on the USB storage device you use.
Special Sound Effects
Selecting PRESET EQ Mode
Your Hi-Fi Component system provides
predefined equalizer settings that are
optimized for particular music genre.
1. Press the PRESET EQ button.
Each time you press the PRESET EQ
button repeatedly, or press the PRESET
EQ button, and then turn the VOLUME/
SEARCH JOG control on the product, the
mode will change as follows:
HIP HOP
;
ROCK
;
JAZZ
;
CLASSIC
;
ELECTRONIC
;
FLAT
;
RANCHERA
;
CUMBIA
;
REGGAE
;
MERENGUE
;
SALSA
;
REGGATON
;
FOLKLORE
;
PARTY
;
POP
2. After selecting the desired mode, you
can use the adjusting JOG to fine tune
the 80Hz, 200Hz, 800Hz, 2kHz and 8kHz
frequency bands to your preference.
3. After making your adjustments, press the
MEMORY button. "SAVE TO USER EQ"
appears on the display. The adjusted EQ
has been saved as USER EQ.
|
NOTES
|
✎
Preset EQ Default value is HIP HOP.
Selecting USER EQ Mode
USER EQ mode shows up to 5 equalizer bands
depending on your setup.
1. To configure the EQ manually, press the
USER EQ button.
2. Use the adjusting JOG to fine tune the
80Hz, 200Hz, 800Hz, 2kHz and 8kHz
frequency bands to your preference.
|
NOTES
|
✎
When the Hi-Fi Component is recording,
the EQ function is turned off automatically
and is unavailable.
✎
If no buttons are pressed within 8 seconds,
your settings will automatically be cancelled
and the previous settings will be saved.
✎
The PRESET EQ mode may be different
depending on your region.
✎
When you switch the unit to a PRESET
EQ mode using the PRESET EQ button,
the selected EQ mode is activated after 2
seconds.
✎
You can apply the GIGA PARTY effect to the
FOOTBALL, EQ functions.
✎
Once you switch the unit to a PRESET EQ
mode, the EQ display will disappear.
26 English
[MX-JS9500-ZA]AH68-02851A-00ENG.indd 26 2015-04-14 오후 1:37:43