CD-ROM/USB
•
"FILE COPY" is displayed and COPY
starts.
•
You can also copy a folder containing
MP3/WMA files to a device on USB 2.
Press and hold the USB REC button while
the system plays an MP3 or WMA file
located in a folder. Your system displays
"FOLDER COPY", and will record all the
files in that folder.
•
When the recording is done, "STOP" is
displayed.
•
If there is a file with the same name
on the USB 2 device, "FILE ALRADY
EXISTS" is displayed, and the function is
canceled.
•
If a microphone is connected to the
main unit and you press the USB REC
button, the currently playing mp3 file
and the sound from the microphone is
recorded onto the USB2 device.
•
Press the USB REC button for a second
to start FILE COPY. Press and hold the
USB REC button for a few seconds to
start FOLDER COPY.
External Source
•
"AUX RECORD" is displayed and
recording starts.
CD/USB1(MP3) & MIC
•
"MP3 RECORD" is displayed and
recording starts.
4. To stop recording, press the
5
button.
The recording is automatically saved as an
MP3 file.
5. After the recording is finished, a directory
named "RECORDING(DISCxxxx)"(FULL
CD RECORDING), "RECORDING"(TRACK
RECORDING) "CD COPY"(CD-ROM/USB),
"TUNER RECORDING", "AUX RECORDING"
or "MP3 RECORDING" is created in your
device.
|
NOTES
|
✎
WMA/MP2 files can only be copied not
recorded.
✎
Do not disconnect the USB device or the AC
Cord during recording. You can cause file
damage.
✎
If you disconnected the USB device during
recording, the product will turn off and you
will not be able to delete the file that has
been recorded. If this occurs, connect the
USB device to a PC, back up the USB data to
the PC, and then reformat the USB device.
✎
If the USB device does not have enough
memory, "NOT ENOUGH MEMORY" will
appear on the display.
✎
The Recording function supports the FAT
file systems only. The NTFS file system is not
supported.
✎
When you use the CD high speed search
function, the CD recording function is
unavailable.
✎
With some USB devices, recording time may
be longer.
✎
In the MY LIST mode, you can't use the
recording function.
✎
When the Recording function is active, the
EQ and GIGA PARTY functions automatically
turn off and are unavailable.
✎
During a CD recording, the REPEAT function
automatically turns off and is unavailable.
✎
If you use the MIC function during a CD
recording, the voice from the microphone
will be recorded.
✎
You can not record audio from the radio
when searching for a station or if there are
no frequencies available when the product
is set to Tuner mode.
✎
Note that setting the input level too loud
when recording music from an external
device through the AUX or USB channel
may introduce noise into the recording.
If this occurs, lower the external device’s
volume level.
25 English
[MX-JS9500-ZA]AH68-02851A-00ENG.indd 25 2015-04-14 오후 1:37:43
To Next Page
Loading...
