•
Pair the Hi-Fi Component with the Bluetooth
device while they are close together.
•
The greater the distance between the Hi-Fi
Component and the Bluetooth device, the
worse the quality. If the distance exceeds the
Bluetooth operational range, the connection
is lost.
•
In poor reception areas, the Bluetooth
connection may not work properly.
•
The Bluetooth connection only works when
the Bluetooth device and the Hi-Fi Component
are close together. The connection will be
automatically cut off if the Bluetooth device
is out of range. Even within range, the sound
quality may be degraded by obstacles such as
walls or doors.
•
This wireless device may cause electric
interference during its operation.
To connect the Hi-Fi Component to a
Bluetooth device
Before you begin, confirm that your Bluetooth
device supports the Bluetooth-compliant
stereo headset function.
1. Press the Bluetooth button of the Hi-Fi
Component to display the BLUETOOTH
message.
•
You will see WAIT for a short period
of time and then READY on the front
display of the Hi-Fi Component.
2.
Select the Bluetooth menu on the Bluetooth
device you want to connect. (Refer to the
Bluetooth device's user manual.)
3. Select "[Samsung] HI-FI XXXXXX J-Series"
from the list.
•
When the product is connected to the
Bluetooth device, it will display Device
name
;
CONNECTED
;
BLUETOOTH
on the front display.
•
If the Bluetooth device has failed to pair
with the product, delete the previous
"[Samsung] HI-FI XXXXXX J-Series"
found by the Bluetooth device and have
it search for the product again.
4. You can listen to the music playing on the
connected Bluetooth device over the Hi-Fi
Component system.
•
In Bluetooth mode, some model's
Play/Stop/Next/Back functions are not
available.
|
NOTES
|
✎
The product only supports Middle Quality
SBC data (up to 237kbps@48kHz), and
does not support High Quality SBC data
(328kbps@44.1kHz).
✎
The AVRCP feature is not supported.
✎
Connect only to a Bluetooth device that
supports the A2DP (AV) function.
✎
You cannot connect to a Bluetooth device
that supports only the HF (Hands Free)
function.
✎
Only one Bluetooth device can be paired at
a time.
✎
Once you have turned off the Hi-Fi Component
and pairing is terminated, pairing will not be
restored automatically. To reconnect, you must
pair the device again.
✎
The Hi-Fi Component system may not search
or connect properly in the following cases:
-
If there is a strong electrical field around
the Hi-Fi Component.
-
If the Bluetooth device is turned off, not
in place, or malfunctions.
✎
Note that such devices as microwave ovens,
wireless LAN adaptors, fluorescent lights,
and gas stoves use the same frequency
range as the Bluetooth device, which can
cause electric interference.
To disconnect a Bluetooth device from
the Hi-Fi Component
You can disconnect a Bluetooth device from
the Hi-Fi Component. For instructions, see the
Bluetooth device's user manual.
•
The Hi-Fi Component will be disconnected.
•
When the Hi-Fi Component is disconnected
from the Bluetooth device, the Hi-Fi
Component displays DISCONNECTED
;
READY on its display.
18 English
[MX-JS9500-ZA]AH68-02851A-00ENG.indd 18 2015-04-14 오후 1:37:42
To Next Page
Loading...
