ENG - 13
When a mobile device is connected using Bluetooth, you can hear stereo sound without the hassle of
cabling.
5 Sec
* In battery mode, when the Sound Tower is power off, Bluetooth connection and the party audio app are
not available.
Press and hold the button on the remote control for more than 5 seconds to enter the
“” mode.
Press the button on the rear panel.
On your device, select “” from the list that appears.
• After the device is connected. The third light on the top panel blinks three times cyan, and the
bluetooth light on the rear panel is steady on.
Play music les from the device connected via Bluetooth through the Sound Tower.
• Sound tower will play voice prompt via bluetooth disconnected.
• If a previously connected Sound Tower listing (e.g. “”) appears in the list, delete
it.
• Then repeat steps 1 and 2.
• : In this mode, you can use the previously connected TV or mobile device to connect to
Sound Tower.
• : In this mode, you can connect a new device to the Sound Tower.
(Press and hold the
button on the remote control for more than 5 seconds or press the
button on the rear of the Sound Tower to enter the “” mode.)
To Next Page
Loading...
