ENG - 3
POWER
Press the
button to enter pairing mode, "PAIRING" LED on the rear plane
will be fast blink.
Press the button to connect to another same model Sound Tower
wirelessly.
Press the button to connect up to ten Sound Tower systems wirelessly.
Connect a USB device to the ports on the main unit.
If you connect your cell phone to the port, you can charge it.
• Press the button to select .
You can give an echo effect to the sound from a connected microphone by
adjusting the knob.
Use the knob to adjust the volume of a connected microphone .
Connect your microphone to the jack.
Use an Audio Cable (not supplied) to connect terminals on the
main unit to Audio In on an external analog output device.
Use an Audio Cable (not supplied) to connect terminals on the main unit to
Audio Out on an external analog output device.
Use an Audio (AUX) Cable (not supplied) to connect jack on the main unit to
Audio Out on an external device.
Connect the power cord to the jack and connect the other end of the power
cord to a wall socket to supply electrical power to the Sound Tower.
To Next Page
Loading...
