3-3
3. Disassembly and Reassembly
- 이 문서는 삼성전자의 기술 자산으로 승인자만이 사용할 수 있습니다 -
- This Document can not be used without Samsung's authorization -
R530/R730
Part Picture Description
Main
System
8. Remove the memory card.
9. Remove the HDD.
1) After removing the screws (2EA) for xing HDD and
remove the cover to the arrow direction.
(M2 x L4, Black, 2EA)
2). With holding the insulator, separate the HDD from the
connector by pushing it to the arrow direction.
(M2 x L8, Black: 2ea)
3) Remove the HDD by lifting the HDD insulator up.
[Notice]
When you lift the HDD up, you shall not enforce excessive
strength.
To Next Page
Loading...
Need help?
General