Software Update
10
Copying the drive (making a disk image)
To replace the drive, move the data to the new drive by making a disk image. The
new drive must be large enough to hold the data from the current drive. Purchase an
external hard drive connector separately to connect the new drive to the computer.
When Windows is installed on a non-user replaceable disk, such as an eMMC, you
cannot copy the drive.
1 Connect the new drive to the computer with an external hard drive connector.
2 Select the Start button ( )
→
All apps
→
Samsung Recovery
.
3 Select
Create a factory state disk
or
Create a disk copy
.
4 Select a disk to be copied
→
Start copy
.
The data on the disk is copied to the new disk.
To Next Page
Loading...
