Samsung POWERBOT User Manual (English)

Other manuals for Samsung POWERBOT

Questions and Answers:

D
Danielle QuinnAug 21, 2025
What to do if my Samsung POWERbot is not working at all?
- M
  Michelle MillerAug 21, 2025
  If your Samsung POWERbot Vacuum Cleaner isn't working, here are a few things to check: First, ensure that the emergency switch is turned on. Next, verify that all the icons are displayed on the display panel. Also, check if the POWERbot's battery is depleted. If 'Lo' is displayed, place the POWERbot on the docking station to charge it. If the battery indicator is blinking, manually place the POWERbot on the docking station to charge. Lastly, if the remote control isn't working, replace the batteries with AAA type batteries.
S
Shelley RiveraAug 22, 2025
What to do if Samsung POWERbot has stopped during cleaning?
- Z
  Zachary ThomasAug 22, 2025
  If your Samsung POWERbot Vacuum Cleaner stops during cleaning, there could be a few reasons. If 'Lo' is displayed on the display panel or the battery indicator is blinking, place the POWERbot on the docking station to charge it. If the POWERbot is stuck on an obstacle like a cord or threshold, pick it up and move it away. Also, check the drive wheels for any caught fabric or string, and if found, turn off the emergency switch and remove it before using the POWERbot again.
A
Ashley JacksonAug 25, 2025
What to do if point cleaning is not working on Samsung POWERbot?
- M
  Michael RandallAug 25, 2025
  If point cleaning isn't working on your Samsung POWERbot Vacuum Cleaner, make sure you're pointing the red light on the floor within 1.6 ft (0.5 m) of the POWERbot, instead of directly at it. Also, avoid using point cleaning in direct sunlight, under bright light, or on dark floors.
C
Chris PittmanAug 26, 2025
Why Intelligent power control function does not work on Samsung POWERbot?
- S
  Sally HeathAug 26, 2025
  The intelligent power control function on your Samsung POWERbot Vacuum Cleaner may not work properly if the POWERbot cleans a carpet with short fiber and bright color, as it may mistakenly recognize the carpet as a floor.
J
julia39Aug 27, 2025
Why has my Samsung Vacuum Cleaner POWERbot stopped during cleaning?
- D
  Daisy StrongAug 27, 2025
  Your Samsung POWERbot Vacuum Cleaner might have stopped during cleaning because it is immobilized by an obstacle such as a cord or threshold, or fabric or string is caught in a drive wheel. If the POWERbot is stuck, pick it up and move it away from the obstacle. If fabric or string is caught in a drive wheel, turn off the emergency switch and remove the fabric or string before using it again.
D
douglas00Aug 29, 2025
How to troubleshoot a Samsung Vacuum Cleaner POWERbot that is not working?
- K
  Kim Henry DVMAug 29, 2025
  If your Samsung POWERbot Vacuum Cleaner is not working at all, check if the emergency switch is on. Also, verify if all the icons are displayed on the display panel and ensure the POWERbot's battery is not depleted. If the remote controller is not working, replace the batteries (AAA type).
L
Lucas HoffmanAug 31, 2025
Why Samsung POWERbot suction power is weak?
- B
  Brian LeeAug 31, 2025
  Weak suction power in your Samsung POWERbot Vacuum Cleaner can occur for several reasons. The 'Filter inspection indicator' might be on, indicating the need to turn off the emergency switch and clean the dustbin. Also, too much dust in the dustbin can weaken suction; in this case, turn off the emergency switch and empty the dustbin. A blocked intake on the bottom of the POWERbot can also cause this issue; turn off the emergency switch and remove any foreign matter from the intake. Finally, a sudden increase in noise may indicate the need to turn off the emergency switch and empty the dustbin.
A
Arthur LewisSep 1, 2025
Why Samsung POWERbot cannot find the docking station?
- M
  michael82Sep 2, 2025
  If your Samsung POWERbot Vacuum Cleaner is having trouble finding its docking station, there are a few things you can check. First, ensure there isn't a power failure or that the power plug is unplugged. Next, make sure there are no obstacles around the docking station that could be preventing the POWERbot from returning. Finally, check the charge pins for any foreign matter; if present, clean it off the pins.
C
Cole SilvaSep 3, 2025
Why Samsung POWERbot suddenly cleans diagonally?
- W
  william67Sep 3, 2025
  If your Samsung POWERbot Vacuum Cleaner is suddenly cleaning diagonally, consider these factors: Check if the docking station is installed along the grain of wooden floors or tiles. The POWERbot may clean in a diagonal direction if it is moving to another area using the shortest route, or if it made contact with an obstacle at that angle. It might also occur if it was charged at the docking station at an angle or if the grain of the wooden/tile floor is skewed in that direction.
J
jlongSep 5, 2025
Why Edge clean master function does not work on Samsung POWERbot?
- M
  Meagan HernandezSep 5, 2025
  The Edge clean master function on your Samsung POWERbot Vacuum Cleaner may not work if the POWERbot cannot recognize the wall. This can also occur if there is an obstacle made of reflective material in front of the wall, if the wall itself is made of reflective material, or if the wall is a dark color.

Samsung POWERBOT Specifications

General

Sensor	FullView
Number of filters	1 pc(s)
Maximum input power	- W
Shape	D-shape
Display type	LED
Product color	Blue
Built-in display	Yes
Dust container type	Bagless
Cleaning speed	320 mm/sec
Dust capacity (total)	0.7 L
HEPA filtration system	-
Battery capacity	- mAh
Package depth	530 mm
Package width	476 mm
Package height	184 mm
Package weight	7120 g