RF323TE**
The Alarm button serves two purposes:
- To turn the door open alarm on and off
- To reset the water fi lter life indicator.
1) Door Alarm Function If the door alarm is set to On, an
alarm beeps if any refrigerator door is left open for
more than three minutes. The beeping stops when you
close the door. The door alarm function is pre-set to On
in the factory. You can turn it off by pressing and then
releasing the Alarm button. You can turn it back on in
the same fashion. The icon lights up when the function
is on.
When the Door Alarm function is on and the alarm
sound is triggered, the Door Alarm Icon will blink while
the alarm sounds.
2) Water Filter Life Indicator Function After you replace
the water filter, touch and hold this button for 3
seconds to reset the water fi lter life indicator. When
you reset the water fi lter life indicator, the Filter icon
on the panel turns Off. The Filter icon will turn red to
let you know it is time to change the water fi lter after
six months (about 300 gallons). Some areas have large
amounts of lime in their water, which causes the water
fi lter to clog more quickly. If this is the case in your
area, you will have to change the fi lter more frequently
than every six months.
3
Alram(Hold 3 sec for Filter Reset
3. Instruction of Function
3-1. Digital Display
To do list
RF31FMED**
(For Ice/water model Only )
54
To Next Page
Loading...
Need help?
General
