6
● Unplug the appliance before replacing or repairing electrical parts.
⇒ Be careful to avoid electric shock.
● Always use only the correct replacement parts.
⇒ Check the model name, rating voltage, rating current, running temperature symbols.
● When troubleshooting, verify that wiring harnesses are connected securely.
⇒ Make not to be separated when some power is imposed.
● Check the traces of water infiltration at the electric parts.
⇒ If there is a trace of water infiltration, exchange or tape the parts.
● Check the assemble status of parts after troubleshooting.
⇒ It must be in the same assembled state when compared with the state before disassembly.
● Check the use circumstance of refrigerator.
⇒ If the refrigerator is installed at the place that is damp or wet, or status of installation is
unstable, change the installation place.
● Ground the refrigerator properly
⇒ Particularly, Be sure to earth when there is a risk of an electric leakage by humidity or wetness.
● Do not use multi plugs in a plug socket at the same time.
Check if the power cord and socket is damaged, pressed, squeezed, or fired.
⇒ If the plug or plug socket is damaged, repair or exchange it immediately.
● Do not allow consumers to repair the appliance by themselves.
● Do not store other materials except the foods.
⇒ Drugs or scientific materials : difficult to keep precise temperature.
⇒ The inflammables(alcohol, benzene, ether, LP gas, butane gas etc.): have risk of explosion.
1. Precautions(Safety Warnings)
To Next Page
Loading...
Need help?
General
