LG_MULTI_F_3828A20097W_1[1]
1. Remove 3 screws of the PBA cover.
2. Disengage all housing connectors connected
with Inverter PBA and Main PBA.
3. Remove the Inverter PBA and
bypulling the hook out. (refer
Disconnect the sensor and the
1. Turn off the refrigerator.
2. Remove all the storage inside.
2. Lay the front of the refrigerator to face the
3. Holding Chassis-comp and remove 4 screw
with phillips head driver.
To Next Page
Loading...
