76
Chapter 3.
Settings and Upgrade
Battery
Please refer to the following instructions when running the
computer on battery power without connecting the AC power.
A Lithium-Ion smart battery is supplied with this computer.
Carefully read and follow the precautions printed on the •
battery before using the battery.
Before using your computer for the fi rst time after •
purchasing it, charge the battery completely.
The images used for the illustration are of a representative •
model, therefore the images may diff er from the the actual
product.
Precautions
Use only chargers specifi ed in the User Manual.•
Never heat the battery pack, put it near or in a fi re or use at •
a temperature higher than 60°C, as this may cause fi re.
Never cause a short circuit between the battery pack •
terminals or disassemble the battery pack.
Carefully read and follow the precautions printed on the •
battery and the safety instructions in the User Manual
before using the battery.
Please refer to the system operation environment of •
this manual and operate and store the battery at room
temperature.
Charging the Battery
1
Attach the battery and connect the AC adapter to the DC-in
jack of the computer.
The battery will then start charging.
2
When charging is complete, the Charge LED turns green.
Status Charge LED
Charging
Red or Orange
Charging complete
Green or Blue
AC adapter not
connected
O ff
To Next Page
Loading...
Need help?
General