OSD (On Screen Display)
ENGLISH
17
j. Time (see page 44)
Indicates the time you are recording.
k. Title (see page 46)
Indicates the recorded title you have set.
It is superimposed on the scene.
l. Self diagnosis (see page 62)
(TAPE, TAPE END) Checks the operation of the Camcorder.
m. DSE (Digital Special Effect) (see page 42)
Indicates the DSE mode is activated.
The operation modes are MAKE-UP, EMBOSS, WIDE(16:9), CINEMA, NEG., MIRROR, MOSAIC,
B&W, SEPIA, GHOST, STROBE and LSS.
n. White Balance mode (see page 51)
Indicates the White Balance mode is activated.
The White Balance modes are AUTO, INDOOR and OUTDOOR.
o. Tape counter
Indicates amount of the tape used.
We recommend that you reset the tape counter with the COUNTER RESET button before you start
recording.
p. Operation mode
Indicates the operation mode is activated.
The operation modes are STBY, REC, STOP, PLAY, FF, REW.
q. Hi8 (SCL550 only) (see page 56)
Indicates you are using Hi8 tape when recording or playing back.
r. DEW condensation (see page 65)
Monitors the moisture condensation.
s. Digital zoom (see page 35)
Indicates digital zoom is activated.
t. Snap Shot (see page 50)
Indicates the time left during Snap Shot Recording.
u. Playback speed
Indicates the playback speed in PLAYER mode. (see page 56)
SP is not displayed.
v. Zero return(see page 57)
Indicates that the zero return is activated.
w. VOLUME (see page 58)
To Next Page
Loading...
