Zooming In and Out
ENGLISH
34
✤ Zoom works in CAMERAmode only.
✤ Zooming is a recording technique that lets you change the size of the subject in the picture. For more
professional looking recordings, do not use the zoom function too often.
✤ You can also choose from two zoom speeds to suit different needs :
■ Gradual zoom (9~12 seconds from TELE/WIDE to WIDE/TELE)
■ High-Speed zoom (3~6 seconds from TELE/WIDE to WIDE/TELE)
✤ Use these features for different shots; please note that overuse of the zoom feature can lead to unpro-
fessional looking results and a reduction of battery pack usage time.
1. Move the zoom lever a little for a gradual zoom, move it fur-
ther for a high-speed zoom.
Your zooming is monitored on the OSD.
2. T (Telephoto) side:
Subject appears closer.
3. W (Wide angle) side:
Subject appears further away.
Note: MACRO
If you cannot get a sharp focus in telephoto zoom, move the lever to the “W” side until the focus is
sharp.
You can record a subject that is at least 1 mm away from the lens surface in the wide angle position.
T
W
To Next Page
Loading...
