Samsung SCL540 - Setting the Remote Control; Setting the Viewfindwr( EVF or CVF)

✤ This function prevents the EVF from turning off even when the LCD is opened. You may use it in a
bright area when the LCD is difficult to view.
1. Set the power switch to CAMERAmode and LOCK/STANDBY switch to STANDBY mode.
2. Press the MENU ON/OFF button, then the MENU list will appear.
(SCL540 : CVF.....OFF)
3. Turn the MENU dial to EVF(or CVF).
■ It is pre-set to OFF for initial connection with power.
4. Press ENTER to select ON/OFF.
5. Press the MENU ON/OFF button to end the EVF(or CVF)
setting.
Setting the Remote Control (SCL530/L540/L550)
✤ This function is used to turn the Remote Control ON/OFF. (See page 19)
1. Set the power switch to CAMERAmode and LOCK/STANDBY switch to STANDBY mode.
2. Press the MENU ON/OFF button, then the MENU list will
appear.
3. Turn the MENU dial so that REMOTE is highlighted.
4. Press ENTER to select ON/OFF.
5. Press the MENU ON/OFF button to exit the Remote Control
setting screen.
Setting the Viewfinder (EVF or CVF)
52
LCD ADJUST
EVF......................OFF
DIS........................OFF
D.ZOOM ..............OFF
DEMO..................OFF
PROGRAM AE
LCD ADJUST
EVF......................ON
DIS........................OFF
D.ZOOM ..............OFF
DEMO..................OFF
PROGRAM AE
DSE SELECT
WHITE BALANCE
REMOTE............ON
TITLE LANGUAGE
TITLE SELECT
CLOCK SETTING
DSE SELECT
WHITE BALANCE
REMOTE............OFF
TITLE LANGUAGE
TITLE SELECT
CLOCK SETTING