Demonstration
✤ Demonstration automatically shows you the major functions that are included with your camcorder so
that you may use them more easily.
✤ The DEMO function is only available in CAMERAmode when you are not recording.
✤ The Demonstration operates repeatedly until the MENU ON/OFF button is pressed to stop it.
1. Set the power switch to CAMERAmode and LOCK/STANDBYswitch to STANDBY mode.
2. Press the MENU ON/OFF button, then the MENU list
will appear. (SCL540 : CVF.....OFF)
3. Turn the MENU dial so that DEMO is highlighted.
4. Press ENTER to select ON.
■ Demonstration will start.
5. Press the MENU ON/OFF button again to end the Demonstration.
To Next Page
Loading...
