ENGLISH
33
Adjusting the LCD during PLAY
The LCD adjustment method in PLAYER mode is identical to step number 4 of page 30, except the power
switch must be set to PLAYER.
Controlling the Sound from the Speaker
✤ When you use the LCD monitor while playing back, you
can hear sound from the Speaker.
✤ Volume of the Speaker is controlled by the MENU dial
tab on the camcorder.
✤ If you close the LCD monitor, the LCD monitor and
Speaker are turned off.
✤ If the speaker does not work properly, check the following:
■ Is the LCD monitor closed?
■ Is the volume adjusted to a low level?
■ Is the speaker off? (see page 58)
Notes: ■ Lower the volume if vibration from the built-in speaker causes screen disturbance.
■ Volume display will automatically disappear 3 seconds after adjusting.
Viewing a Still Picture
■ Press (PLAY/STILL) button during playback.
■ To resume playback, press the (PLAY/STILL)
button again.
Picture Search
■ Keep pressing (FF) or (REW) button dur-
ing playback.
■ To resume normal playback, release the button.
PLAY/STILL
REW
FF