ENGLISH
28
b. To stop recording, press the red
START/STOPbutton again.
When Recording stops, STANDBY should be
displayed on the LCD.
When a cassette is loaded and the camcorder is left in STANDBY mode for over 5~6 minutes without
being used, it will turn off automatically.To use it again, push the red START/STOP button or set the
power switch to OFF and then back to CAMERA. This Auto Power Off feature is designed to save battery
power and to protect the Head Drum and tape.
STANDBY
Y:YY:YY
Edit Search
✤ You can view a recorded picture with the EDIT , function
in STANDBY mode. EDIT allows you to reverse and EDIT
allows you to forward, for as long as you keep pressing.
✤ If you press the EDIT button briefly in STANDBY mode,
your camcorder will play back in reverse for 3 seconds and
return to the original position automatically.
EDIT
EDIT
(
Press briefly)
EDIT
To Next Page
Loading...
