Samsung SCP-2120 - Functional Description; Zoom and Focus Settings

SPEED DOME CAMERA User Guide
38
SPEED DOME CAMERA User Guide
39
Operating Your Camera
OSD Setting
Camera ID ON/OFF
Camera Name
ON/OFF
Edit Camera Name
Preset Number ON/OFF
Preset Name
ON/OFF
Edit
Sequence Status ON/OFF
Area Name ON/OFF
PTZ Position ON/OFF
Language
ENGLISH/CHINESE/FRENCH/GERMAN/SPANISH/ITALIAN/
PORTUGUES/KOREAN
Others
Direction
On/Off ON/OFF
Set North Dir. Set North Direction
Clock Setting
Display ON/OFF
Date Format
Set Date
Time Format
Set Time
Alarm Setting
Alarm Enable ON/OFF
Alarm Input
In1
MOD:NC/NO/OFF, P:1~2
SEQ:OFF/HOME/PRESET/SWING/GROUP/
TOUR/TRACE/A.PAN
In2
Alarm Output
Setting 1~2 1~2,MD,AUX
Timer 1~2
OFF/MOMENTARY
ON
1~60(Sec),
1~60(Min)
MD Dwell Time
OFF
ON 1~60(Sec), 1~60(Min)
Initialize
Power On Reset Cancel/Execute
Factory Default Set Cancel/Execute
Camera Default Set Cancel/Execute
Auto Refresh
OFF
ON 1~7Day(s)
Password Setting
On/Off ON/OFF
Edit Password Old Pwd/New Pwd
Status
Functional Description
➡
➡
Focus Mode :
- AUTO : Performs continuous auto-focus.
- MANUAL : Changes the camera mode to Manual Focus.
- ONESHOT : Auto-focuses the camera once after the Pan,
Tilt, or Zoom function is used.
Digital Zoom :
Enables the maximum digital zoom.
Setting the digital zoom to 16X provides a total zoom of
192X.
1. Zoom/Focus Settings
1.1 Focus Mode and Digital Zoom Setting Menu
 ▶
Main Menu/Camera Setting/Focus & Zoom
•Unlike the opticalzoom,thegraphicsqualityofthe
digital zoom decreases as its zoom ratio increases.
•Theauto-focusfunction maynotoperatenormally
under the following conditions :
- When background illumination is low
- While Slow-Shutter is in operation
- If the zoom level is set too high
- When background illumination is too high
- If a long distance object and a close distance object
appear together within a monitoring area
- If there is no contrast, e.g. Ceiling or a wall
- If the camera is facing a thin horizontal line
•AutoFocus focusesonanobjectinthecenterofthe
screen; objects around the screen edges may not be
properly in focus.
Notes
Camera Setting
Focus & Zoom
Focus Mode ONE SHOT
Zoom Tracking
Digital Zoom OFF
Main Menu
Camera Setting
Sequence Setting
P/T Setting
OSD Setting
Alarm Setting
Initialize
Password Setting
Status
Camera Setting
Zoom/Focus
White Balance ATW
Exposure
Back Light OFF
AGC HIGH
SSNR MEDIUM
SSDR
Day/Night
Others