Schedule Set
Sunday ON
Monday OFF
Tuesday OFF
Wednesday OFF
Thursday OFF
Friday OFF
Saturday OFF
Functional Description
Select Day :
At Auto Run, select SCHEDULE to set up each day of the
week, as shown on the side picture. Select a day, change to
ON, and then press Enter.
Select Time :
When turning ON a day, a timetable appears as shown on the
side picture. (Up to 6 timelines can be selected for a day.)
Select the beginning time and sequencing action to schedule
the action.
16. Schedule
Schedule enables you to schedule a sequencing action by day and time.
Schedule Set
No START SEQ No
1 09:00 HOME
2 00:00 OFF
3 00:00 OFF
4 00:00 OFF
5 00:00 OFF
6 00:00 OFF
Clear
➡
➡
•
Auto mode is disabled when AGC is turned OFF. This function is only available when Color
or B/W mode is selected. The camera time must be setup properly prior to using this
option. If the camera does not perform a scheduled sequencing action, please reconfigure
the camera time under OSD Setting > Others > Clock Setting (Refer to Page 71).
Notes
Auto Run
Mode SCHEDULE
Time 30 SEC
17. Power On Resume and MD Dwell Time
▶
Main Menu/Sequence Setting
Power On Resume
:
This is useful when the power is disconnected and
reconnected due to power failures or other power
interruptions.
If the camera was performing a sequence action prior to a
power disconnection, the camera automatically resumes
the action when the power is reconnected.
➡
Sequence Setting
Preset
Swing SEQ
Group SEQ
Tour SEQ
PTZ Trace
Auto Run
Power On Resume ON
•
'Power On Resume' cannot resume a sequence action if the camera’s internal battery is
completely discharged after the camera was left without power supply for a long time.
(The data of the sequence action, however, remains safe even if the internal battery is
completely discharged.)
Notes
Main Menu
Camera Setting
Sequence Setting
P/T Setting
OSD Setting
Alarm Setting
Initialize
Password Setting
Status
To Next Page
Loading...
