Samsung SCP-2120 - PTZ Trace; Auto Run

SPEED DOME CAMERA User Guide
58
SPEED DOME CAMERA User Guide
59
Functional Description
PTZ Trace
Trace 1
Trace 2
Trace 3
Trace 4
PTZ Trace 1
Replay
Replay Once
Memorize
Clear
➡
➡
14. PTZ Trace
 ▶
Main Menu/Sequence Setting/PTZ Trace
Maximum 4 patterns of the manual operation paths (for Pan,
Tilt, Zoom and Focus) are memorized and replayed.
Replay
:
Replays a route saved by the Trace function. Use the Stop
button to stop the replay.
Replay Once :
Replays a saved Trace route once.
Memorize
:
Up to 120 seconds of a memory can be saved. The memory
duration varies depending on the difficulty level of the PTZ
Trace action.  As a trace is saved, the remaining capacity of
the memory card is displayed. When the memory card is
full, it turns off with a message, "Mem. Left: 000%", on
the screen. 
* Use the OSD On button to pause while saving a trace.
(When using the SCC-3100A/SCC-1000 controller)
*  When Using Different Protocols
Clear :
Deletes a saved Trace route.
➡
Sequence Setting
Preset
Swing SEQ
Group SEQ
Tour SEQ
PTZ Trace
Auto Run
Power On Resume ON
Protocol Product Memorize Pause
PELCO-D/P KBD300A Ack, Iris Open
SEC SCC-5000 OSD On, Iris Open
PANASONIC WV-CU161C OSD ON
VICON V1300X-DVC Iris Open
HONEYWELL HTX-3000 Iris Open
AD . OSD On, Iris Open
GE KTD-405 Iris Open
BOSCH . Iris Open
Auto Run
Mode OFF
Time 30 SEC
➡
15. Auto Run
 ▶
Main Menu/Sequence Setting/Auto Run
If there is no controller operation by the user for a certain time,
the sequence operation designated by the user will be
executed.
Mode
:
- Home : Auto run Home Position (Refet to the Preset
Menu.)
- Preset : Auto run a selected preset number.
- Swing : Auto run a selected Swing mode.
- Group : Auto run a selected Group mode.
- Tour : Auto run a selected Tour mode.
- Trace : Auto run a selected trace mode.
- A.Pan : Auto run a 360-degree pan. To activate the
panning command, you need to set up the
camera's tilt angle and auto pan speed manually.
Schedule
: Schedule a sequencing action by day and time.
Refer to the next page.
Time
:
Enables setting up an Auto Run duration. (The duration can
be 5~60 seconds, or 1~60 minutes.)
➡
Sequence Setting
Preset
Swing SEQ
Group SEQ
Tour SEQ
PTZ Trace
Auto Run
Power On Resume ON
Main Menu
Camera Setting
Sequence Setting
P/T Setting
OSD Setting
Alarm Setting
Initialize
Password Setting
Status
Main Menu
Camera Setting
Sequence Setting
P/T Setting
OSD Setting
Alarm Setting
Initialize
Password Setting
Status