Samsung SCP-2120 - Page 23

SPEED DOME CAMERA User Guide
44
SPEED DOME CAMERA User Guide
45
Functional Description
HLC Setting
Level LOW
Mask Tone 05
➡
4.2 HLC
 ▶
Main Menu/Camera Setting/Back Light/HLC
HLC masks strong light sources from the camera lens, blocking
them from saturating the monitor screen.
Level
:
Three HLC operation levels are available: LOW, MEDIUM,
and HIGH.
Mask Tone
:
Adjusts the masking brightness.
•HLC performancevariesdepending onthesize of
bright areas on the screen; please set the installation
angle of your camera to at least 30 degrees for the
best HLC performance.
•HLC activatesonlyin Nightmodewhenthecamera
receives a certain amount of a highlight in the dark.
•HLC does not activateinNightmodewhenthereis
no light or too much light.
•HLC does notactivatewhilethe Digital Zoommode
is ON.
Notes
Camera Setting
Zoom/Focus
White Balance ATW
Exposure
Back Light HLC
AGC HIGH
SSNR MEDIUM
SSDR
Day/Night
Others
➡
➡
4.3 BLC Setting
 ▶
Main Menu/Camera Setting/Back Light/BLC
You can selectively choose a screen area to see objects within
the area more clearly than others.
Four-direction Joystick Controls :
- Moving the joystick in all four directions—upward,
downward, left, and right—adjusts the location and size
of a selected area.
Zoom Control :
- Zoom Tele : Enlarges the size of a selected area.
- Zoom Wide : Reduces the size of a selected area.
Changing Levels:
- To change the level from LOW to MEDIUM or HIGH, press
the number 1 and Preset keys.
BLC MEDIUM
1+PST:Level Change
↑:Up↓:Down ←:Left →:Right
W:Decrease T:Increase
Camera Setting
Zoom/Focus
White Balance ATW
Exposure
Back Light BLC
AGC HIGH
SSNR MEDIUM
SSDR
Day/Night
Others
➡
Main Menu
Camera Setting
Sequence Setting
P/T Setting
OSD Setting
Alarm Setting
Initialize
Password Setting
Status
Main Menu
Camera Setting
Sequence Setting
P/T Setting
OSD Setting
Alarm Setting
Initialize
Password Setting
Status