Samsung SCP-2370RH - Using and Setting the Menus

36_
setup
setup
USING AND SETTING THE MENUS
OSD (On-screen Display) Indicators
Operating Your Camera
Panning and Tilting :
Use the joystick of the controller or its direction buttons.
Controlling Zoom :
Move the joystick clockwise (Tele) or counterclockwise (Wide), or use the zoom buttons.
Accessing Screen Menus:
Press the Menu or OSD button on the controller.
For more detailed information about controls when using a third party controller or a DVR, refer to the user’s manual of
that product
OSD Commands, Function Chart, and Menu Controls (Applied to Samsung
T/Samsung E protocol)
This camera can be operated by using two methods: Using hot keys on its dedicated controller, or
accessing the OSD (On Screen Display) on the video output.
The OSD menu commands are as follows:
Command Function
Move the joystick up/down/left/right Moves the OSD menus up/down/left/right, respectively.
Enter/Focus Far Selects a menu and allows access to the sub menus.
ESC/Focus Near Cancels a command and moves back to an upper-level menu.
z
z
z
M

Camera Setting
偓Zoom/Focus
White Balance ATW
------ 
------ 
Has a submenu
Has no submenu
Ú
For a mode with “ ” next to it, you can press “Enter” to move to a sub menu.