56_
setup
setup
Auto Run
If an operator is not controlling the dome at a specific time, the
sequence operation scheduled by the user will be executed.
Mode :
HOME : Auto run Home Position (Refer to the Preset Menu.)
PRESET : Auto run a selected preset number.
SWING : Auto run a selected Swing mode.
GROUP : Auto run a selected Group mode.
TOUR : Auto run a selected Tour mode.
TRACE : Auto run a selected trace mode.
A.PAN : Auto run a 360-degree pan. To activate the
panning command, you need to set up the
camera’s tilt angle and auto pan speed manually.
SCHEDULE : Execute Auto Run on the selected day of the
week.
Time :
Enables setting up an Auto Run duration. (The duration can be 5~30
seconds, or 1~5 minutes.)
z
-
-
-
-
-
-
-
-
z
Sequence Setting
Preset
Swing SEQ
Group SEQ
Tour SEQ
PTZ Trace
Auto Run
Power On Resume ON
Æ
Auto Run
Mode OFF
Time 30 SEC
Main Menu
Camera Setting
Sequence Setting
P/T Setting
OSD Setting
Alarm Setting
IR Illuminator
Initialize
Password Setting
Status
Æ
To Next Page
Loading...
