setup
38_
setup
CAMERA SETUP
Zoom and Focus Settings
Focus Mode
AUTO : Performs continuous auto-focus.
MANUAL : Changes the camera mode to Manual Focus.
ONE SHOT : Auto-focuses the camera once after the Pan,
Tilt, or Zoom function is used.
Zoom Tracking
Through this menu you can set up the camera’s focus mode when
zooming.
Mode
Auto : Auto-focuses when zooming.
Tracking : Focuses manually when zooming.
Off : Disable the focus modes when zooming. (Full manual
mode)
Speed
Slow/Medium/Fast : Adjusts the zooming speed.
Fast Medium Slow
37x 2.5 sec 3.1 sec 5.6 sec
Digital Zoom
Enables the maximum digital zoom.
Setting the digital zoom to 2x~16x provides a total zoom of 592x.
Unlike the optical zoom, the graphics quality of the digital zoom decreases
as its zoom ratio increases.
The auto-focus function may not operate normally under the following
conditions :
When background illumination is low
While Slow-Shutter is in operation
If the zoom level is set too high
When background illumination is too high
If a long distance object and a close distance object appear together
within a monitoring area
If there is no contrast, e.g. the sky or a wall
If the camera is facing a thin horizontal line
Auto Focus focuses on an object in the center of the screen; objects around the screen edges may not be properly in focus.
If the IR indicator turns on and the zoom factor is at least x21, the focus mode will be set to Manual regardless of the focus
mode settings.
z
-
-
-
z
-
y
y
y
-
y
z
M
-
-
-
-
-
-
-
Camera Setting
Zoom/Focus
White Balance ATW
Exposure
Back Light OFF
AGC HIGH
SSNR MEDIUM
SSDR
Day & Night
Others
Main Menu
Camera Setting
Sequence Setting
P/T Setting
OSD Setting
Alarm Setting
IR Illuminator
Initialize
Password Setting
Status
Zoom/Focus
Focus Mode ONE SHOT
Zoom Tracking
Digital Zoom OFF
Æ
Æ
To Next Page
Loading...
