Samsung SCP-2370RH - PTZ Control Settings

58_
setup
setup
P/T Setting
Pan/Tilt Limit
The moving ranges in the Pan/Tilt directions can be limited.
Position :
Selecting the Position menu brings up the following screen if it is
for the Pan Limit setting. Move the joystick left and right to select
a movement range from the starting point to the end.
END LIMIT
Enter: Set ESC: Exit
START LIMIT
Enter: Set ESC: Exit
The following picture shows the Tilt Limit setting.
Move the joystick left and right to select a movement range from
the starting point to the end.
END LIMIT
Enter: Set ESC: Exit
START LIMIT
Enter: Set ESC: Exit
Activation :
Sets the configured Pan/Tilt Limit function to use or not.
z
z
P/T Setting
Pan/Tilt Limit
Area Setting
Area Masking
Prop. P/T ON
Digital Flip ON
Image Hold OFF
Jog Speed
MANUAL
Pan/Tilt Limit
Pan Limit
Tilt Limit
Pan Limit
Position
Activation OFF
Æ
Æ
Main Menu
Camera Setting
Sequence Setting
P/T Setting
OSD Setting
Alarm Setting
IR Illuminator
Initialize
Password Setting
Status
Æ