setup
42_
setup
HLC Setting
The HLC settings selectively eliminates high lights in a limited
environment such as the entrance to an apartment parking lot or
gas station, and is useful to detect a small objects like car license
plates.
HLC is disabled during the daytime. While monitoring nigh time
car traffic, if car headlights reflects too much bright light on the screen, the camera automatically
eliminates the headlamp lights and adjusts the color of the license plate accordingly.
Level : Adjusts the HLC sensitivity level.
Mask Tone : Adjusts the mask color on the high lighted area.
Even if HLC is on, car license plates may not be detectable depending on the location and angle of the camera as well as
the lighting condition.
The HLC function will be disabled while using Digital Zoom, Freeze or Stabilizer.
BLC Setting
You can selectively choose a screen area to see objects within the
area more clearly than others.
Four-direction Joystick Controls :
Moving the joystick in all four directions—upward, downward,
left, and right—adjusts the location and size of a selected area.
Zoom Control :
Zoom Tele : Enlarges the size of a selected area.
Zoom Wide : Reduces the size of a selected area.
-
-
M
-
-
y
y
HLC Setting
Level
MEDIUM
Mask Tone 07
1 + PST : Level Change
m: Up n: Down
k: Left l: Right
W: Decrease T: Increase
BLC MEDIUM
To Next Page
Loading...
