Samsung SIR-4260V - Camera Settings: Lens and Exposure; Lens Adjustment Options; Exposure Control Parameters

COLOR DOME CAMERA User’s Manual
18
COLOR DOME CAMERA User’s Manual
19
MAIN SETUP
1.LENS DC
2.EXPOSURE
3.WHITE BAL ATW
EXPOSURE
1.WhentheSETUPmenuscreenisdisplayed,select‘EXPOSURE’byusingtheFunctionSetupswitch.
2.SelectadesiredmodeusingtheFunctionSetupswitch.
• When the SHUTTER is set to MANUAL or A.FLK mode, SENS-UP will be disabled.
Notes

AGC(AUTOGAINCONTROL):Thehigherthegainlevel,thebrighterthescreen-butthe
higher the noise.
- OFF : Deactivates the AGC function.
- LOW : Allows automatic gain control from 5.3dB to 32dB.
- HIGH : Allows automatic gain control from 5.3dB to 37dB.

SENS-UP:Whenitisnightordark,thecameraautomaticallydetectsthelightleveland
maintains a clear picture if this mode is activated.
- OFF : Deactivates the SENS-UP function.
- AUTO : Activates the SENS-UP function.

RETURN:SelectthistosavethechangesintheEXPOSUREmenuandreturntotheSETUP
menu.

SHUTTER:Youcanselecttheshutter.
- --- : Shutter speed is fixed at 1/60sec(1/50sec)
- ESC : Select this to control the shutter speed automatically. If ESC is selected, the
shutter speed is automatically controlled depending on the ambient
illumination of the subject.
- MANUAL : You can control shutter speed manually.
(NTSC MODEL : 1/60~1/120,000, PAL MODEL : 1/50~1/120,000)
- A.FLK : Select this when you see picture flicker, this can happen when the frequency
of the local lighting clashes with the camera.
EXPOSURE SETUP
1.BRIGHTNESS 25
2.SHUTTER ---
3.AGC HIGH
4.SENS-UP OFF
5.RETURN
• If you press the Function Setup switch to ‘AUTO’ mode, you can adjust brightness by
increasing or decreasing the shutter speed. (x2 ~ x512)
• Note that the higher the zoom level, the brighter the screen, but the more likely there will be
a ghosting effect.
• It is normal for Noise, Spots and Whitish symptoms to appear in SENS-UP mode when the
D-zoom level is increased.
Notes
MAIN SETUP
1.LENS DC
2.EXPOSURE
Using this function, you can control the screen brightness.
1. When the SETUP menu screen is displayed, selectLENSbyusingtheFunctionSetup
switch so that the arrow indicatesLENS.
2. DC : You can adjust the minimum shutter and maximum value of ESC shutter mode.
LENS
3.TheLensmodehassubmenuitemsaslistedbelow.
 -BRIGHTNESS :Adjuststhevideobrightness.
 -FOCUSADJ :ToadjusttheDClensfocuscorrectly,youmustactivatetheFocusSettingsmode
undereachlensmenu.ActivatetheFocusSettingsmode,adjustthelensfocus,
and then deactivate the settings mode.
Operating Your Camera