Samsung SIR-4260V - Camera Settings: Noise Reduction and Day;Night; SSNR3 Noise Reduction; Day;Night Mode Configuration

COLOR DOME CAMERA User’s Manual
24
COLOR DOME CAMERA User’s Manual
25
2.SelectadesiredmodeusingtheFunctionSetupswitchaccordingtothepicturedisplayyouwant.
COLOR : The picture is always displayed in color.
B/W : The picture is always displayed in black and white.
- IR MODE : When IR LED is turned on in B/W, the objects can
be clearly identified due to the function that
decreases screen saturation of objects within a
short distance.
· TOP/BOTTOM/LEFT/RIGHT : Adjust the range according to
the location of objects.
- IR LEVEL : Select LOW when objects appears within a short distance or select HIGH when
objects appears within a long distance on the screen.

AUTO : The mode is switched to ’Color‘ in a normal
environment, but switches to ’B/W‘ mode when
ambient illumination is low. To set up the switching
timeforAUTOmode,presstheFunctionSetup
switch. You can turn on or off the burst signal on
B/W mode.
- BURST MODE : You can turn on or off the burst signal on
B/W mode.
- DURATION : You can select brightness of illumination about changing the day/night mode.
- DWELL TIME : You can select the duration time about changing the day/night mode. 
3s, 5s, 7s, 10s, 15s, 20s, 30s, 40, 60s
AUTO SETUP
▶
1.BURST MODE ON
2.COLOR->B/W
DURATION FAST
DWELL TIME 3SEC
3.B/W->COLOR
DURATION FAST
DWELL TIME 10SEC
4.RETURN
You can display pictures in color or black and white.
1.WhentheSETUPmenuscreenisdisplayed,select‘DAY/NIGHT’byusingtheFunctionSetup
switchsothatthearrowindicates‘DAY/NIGHT’.
DAY/NIGHT
MAIN SETUP
1.LENS DC
2.EXPOSURE
3.WHITE BAL ATW
4.SSDR
OFF
5.BACKLIGHT OFF
6.SSNR3 ON
7.DAY/NIGHT AUTO
8.SPECIAL
• You cannot set the SSNR3 to ‘ON’ or ‘OFF’ when the AGC mode of the EXPOSURE menu is
‘OFF’.
• When adjusting the noise reduction level in the SSNR mode, remember that the higher the
level set, the more the noise level will be reduced, as will the brightness of the image.
Notes
2.SelectadesiredmodeusingtheFunctionSetupswitch.

OFF:DeactivatesSSNR3.Noiseisnotreduced.

ON :ActivatesSSNR3sothatnoiseisreduced.
3.SettheSSNR3modeto‘ON’andpresstheFunctionSetupswitch.Thenyoucanadjustthe
noise reduction level.
This function reduces the background noise in a low luminance environment.
1.WhentheSETUPmenuscreenisdisplayed,select‘SSNR3’ byusingtheFunctionSetup
switchsothatthearrowindicates‘SSNR3’.
SSNR3
MAIN SETUP
1.LENS DC
2.EXPOSURE
3.WHITE BAL ATW
4.SSDR
OFF
5.BACKLIGHT OFF
6.SSNR3 ON
7.DAY/NIGHT AUTO
* The day/night switching point of the
camera can be adjusted.
Color ➞ B/W B/W ➞ Color
Fast
2.5 lux 5 lux
Slow
1 lux 10 lux
Operating Your Camera